This battery should be the same or greater capacity than the original battery If you are really not sure which battery you need to order, contact us first. We can confirm the fitment for you. Please be prepared to give us as much data as possible so that we can decide the best product for your device. This battery is designed to replace the battery in models described below
Chemistry | Li-ion |
Voltage | 3.7V |
Capacity | 1800mAh / 6.66Wh |
Warranty | 1 Year |
Model Number | CS-NP120FU |
Color | Black |
Dimensions(mm) | 53.00 x 35.30 x 11.00mm |
Replaces Manufacturers | Vivikai |
If you are really not sure which battery you need to order, contact us first. We can confirm the fitment for you. Please be prepared to give us as much data as possible so that we can decide the best product for your device. Check out the details below and make sure that your model and battery number are shown in the tables below. We offer a one-year warranty to guarantee against manufacturing defects unless otherwise stated, The warranty covers against defects from manufacture but not if the battery has been misused or modified. If you look after your new battery and only charge the battery when it gets low, This will extend the life of the battery. If the battery is charged too often you will use up the cycle life quickly. The batteries we supply are manufactured to a very high standard. To keep our ISO 9001 certification strict protocols need to be followed. This ensures that the replacement batteries are safe to use in the device they were designed for. This battery should meet or exceed the specifications of the original OEM battery. Devices that this battery are known to fit can be seen in our listing below. Special Remarks:-Device Models and Battery numbers that this battery is known to support:-
Device Models Supported |
Vivikai Hd-c3, Hdc-8800, Hd-d10ii, Hdv-8800 |
Battery Models Supported |
Aiptek, Zpt-pm18, Drift, Drifllbat, Fujifilm, Np-120, Kyocera, Bp-1500s, Pentax, D-li7, Ricoh, Db-43, Toshiba, Pa3790u-1cam, Pa3791u-1cam, Px1657, Px1657e-1brs |
Manufacturers that this product will replace:-
Manufacturers Supported | Actual manufacturer |
Vivikai | Cameron Sino |
Battery Selection (Please read - Important)
There are three important pieces of data that you will need to have to confirm the fitment of this battery in your device. You will need the model of your device, The battery number - found on the original battery and the manufacturer. This is the only way to be 100% sure this is the correct battery.
We do offer higher capacity batteries than your original. Certain extended capacity batteries may be larger and therefore may require that the device will accommodate the extra capacity battery. If your battery is externally mounted on your device this is usually not a problem. Other devices may require an extended cover be used with it.