For nearly 10 Years we have supplied our current range of batteries, We have found our current suppliers to be of the highest quality and have thousands of happy customers using our products in Canada. We endeavor to keep our data as current as possible, but there will be occasions when new models have not been updated to the website yet. Contact us and we will confirm fitment. This battery is designed to replace the battery in models described below
Chemistry | Ni-MH |
Voltage | 3.6V |
Capacity | 700mAh / 2.52Wh |
Warranty | 1 Year |
Model Number | CS-P501CL |
Color | Black |
Dimensions(mm) | 50.79 x 42.40 x 14.23mm |
Replaces Manufacturers | Sanyo |
We endeavor to keep our data as current as possible, but there will be occasions when new models have not been updated to the website yet. Contact us and we will confirm fitment. Usually We can confirm the fitment for you, if you are not sure how to locate the correct information on your device please contact us and we will identify the correct battery for you. Our warranty is valid for a period of one-year, unless otherwise stated. The warranty covers the product against any manufacturing defect. If you look after your new battery and only charge the battery when it gets low, This will extend the life of the battery. If the battery is charged too often you will use up the cycle life quickly. Our ISO 9001 certified factory uses the best quality components and manufactures its products to the same high specifications as the OEM factory battery. We endeavor to make our batteries meet or exceed the original batteries' specifications. Devices that this battery are known to fit can be seen in our listing below. Special Remarks:-Device Models and Battery numbers that this battery is known to support:-
Device Models Supported |
Sanyo, 23621, 3n-600aa(mtm), Cl-100w, Cl-200, Cl-300, Cl-400, Cl-405, Cl-410, Ft-4400, Ft-4510, Ft-5400, Ft-5405, Ft-5410, Ges-pcf02 |
Battery Models Supported |
Bell Phone, bp-t18, bp-t24, p-p501, ge, bt-15, gp, gp60aak3bms, gp80aas3bmx, panasonic, hhr-p505, hhr-p505pa, kx-a36, kx-tca14, p-p501, p-p504, p-p508, p-p510, rct-3a-c1, type 21, type 1, radio Shack, hhr-p505, kx-a36, kx-tca14, p-p501, p-p504, p-p508, p-p510, rct-3a-c1, type 1, type 21, sony, bp-t18, bp-t24, toshiba, tbr-8000, trb-1981, uniden, bbty0300001, bbty0444001, bbty0449001, bt-800, bt-905 |
Manufacturers that this product will replace:-
Manufacturers Supported | Actual manufacturer |
Sanyo | Cameron Sino |
Battery Selection (Please read - Important)
There are three important pieces of data that you will need to have to confirm the fitment of this battery in your device. You will need the model of your device, The battery number - found on the original battery and the manufacturer. This is the only way to be 100% sure this is the correct battery.
Please be advised that some higher capacity batteries are larger than the standard battery from the manufacturers. Please make sure that your model number is shown in the information above before ordering. If there is any doubt contact us first and we can advise if this is a suitable replacement for your device.