The Sealed lead acid batteries that we supply are built using high quality parts from leading manufacturers, be assured this battery will function the same as the your original UPS battery. Sealed Lead Acid batteries are an expensive product to ship around because of their weight. It is essential that you confirm you have ordered the correct batteries. It usually only takes a few minutes to take a look at the existing batteries in your unit. You can then confirm that the dimensions of our recommended replacement mact your original UPS battery. This battery is designed to replace the battery in models described below
Chemistry | AGM (Sealed Lead Acid) |
Voltage | 12V |
Capacity | 7Ah / 84Wh |
Warranty | 1 Year |
Model Number | CB1270X2-11484 |
Qty Batteries Included & Terminal Style | 2 Batteries / T2 |
Dimensions(mm) | 151 x 65 x 94mm |
Dimensions(Inches) | 5.95 x 2.56 x 3.7 Inches |
UPS unit's have a recalibration procedure built into their firmware. This involves deep-discharging and recharging the battery while the UPS is in a special test mode. Instructions for triggering such a recalibration will vary according to your UPS manufacturer. You can usually consult the devices handbook for instructions on this procedure. If both your battery and model number of your device is shown in the table below you should be good to order. If for any reason the product develops a manufacturing defect during the 12 month warranty period we will replace the defective item free of charge. Different chemistries of batteries have different cycle lives, Sealed Lead Acid usually lasts for around 1000 cycles, although if the battery is fully charged and then fully discharged on every use this will drop to around 200 cycles. How can I be sure that this battery is safe? ISO 9001 certification means that our factories never take shortcuts with the manufacture of our batteries. All safety components are included. This ensures safe trouble free operation of this replacement battery. The specifications should be the same as or better than the original. Fitments that apply to your UPS should be shown in the table underneath. Special Remarks:-Device Models and Battery types supplied:-
UPS Model Supported |
Powerware 5115 |
Type of Batteries Supplied |
(2) CB Range 12V 7.2Ah batteries. |
Manufacturers that this product will replace:-
Manufacturers Supported | Actual manufacturer |
Powerware | CB Range |
Battery Selection (Please read - Important)
Confirm that all the details listed below match to your original battery before ordering. Some models have more than one battery type available and the only way you can confirm the correct battery is to remove the original.
Usually, if the capacity of the battery that you are viewing here is much greater than your original this may mean that you have made an incorrect selection. The replacement battery shown should be within 1 or 2 A/H of your original.