The RBC6 replacement battery cartridge consists of two 12V 12Ah batteries with F2 or T2 connectors. These replacements sit side by side with a single connecting cable between them. Quite a simple replacement process on this one. A good idea before you start puling connectors or cables off your old battery is to take a couple of close up shots so that you can see how the wiring was originally configured. Most 12V 12Ah batteries are identical in size with a very slight Variance between them depending on manufacturer. You can you tell if your battery needs replacing by looking at the serial number on your APC unit, this is usually located at the back or underside of the UPS unit, the bottom row indicates the serial number of the UPS the first two numbers show the year that the UPS was made. So as an example if you had serial number SB0976886634 the age of the UPS would be 2009. This age will help you decide if it's the battery that needs replacing. The average lifesspan of a sealed lead acid battery in this kind of standby use application is around 3-5 years, but this can change and is affected by variables such as heat and humidity.The quality of our replacement batteries are as good if not better than the quality of the original batteries we have a no quibble 1-year warranty which is extendable by up to 3 years for an additional fee. it's important that you are 100% sure that you are ordering the correct batteries for your UPS unit If you have any doubts, please contact us before ordering.
Please Note: This battery does not come with cables/adapters to connect to your specific device you need to re-use the existing cabling and connections so please make sure if removing the old batteries and disposing of them keep the old connectors and cables.
- This RBC6 (Replacement Battery Cartridge) uses 2 Piece of 12V 12A/H batteries.
- The RBC6 battery uses AGM Technology.
- The RBC6 batteries are a Maintenance-Free Design and as such are totally spill proof.
- Please make sure that you check the dimensions of the batteries you are replacing before ordering. We recommend removal of the old ones before ordering to save wasted time getting the wrong ones.
RBC SPECIFICATIONS |
# In Pack | 2 Piece |
Chemistry | AGM |
Voltage | 12 |
Capacity (Ah) | 12 |
Connector | T2 |
Weight (Lbs) | 7.94 |
Weight (Kgs) | 3.6 |
Warranty | 1 Year |
RBC Model | RBC6 |
Spec-Sheet | CB1212 Specs |
EACH BATTERY DIMENSIONS |
Length (inches | 5.95 |
Width (inches) | 3.86 |
HT (Inches) | 3.7 |
HT Top T (In) | 3.94 |
Length (mm) | 151 |
Width (mm) | 98 |
HT (mm) | 94 |
HT Top T (mm) | 100 |
Size Variance | + or - 1% |
If you have any further questions please do not hesitate to contact us. If you want to get the maximum runtime out of your unit you may want to consider our second upgrade option and select the 2 x 12v 14Ah option. This will increase the runtime of your APC back up system by approx 15%. The batteries are the same size they just have a higher capacity and will fit and charge perfectly in place of the 12V 12Ah.